APC by Schneider Electric Back-UPS 600VA Tower UPS
- Compact size accommodates installation in a variety of environments
- Data line protection ensures complete protection of your equipment from surges
- LED display provides easy-to-read status of unit and utility power conditions
- 1 USB smart charging port
- Audible alarms provide notification of changing utility power and UPS power conditions
- User replaceable battery, BE425M exclusive
Product Details
General Information
| UPS topology | Standby (Offline) |
| Output power capacity | 0.6 kVA |
| Output power | 330 W |
| Input operation voltage (min) | 92 V |
| Input operation voltage (max) | 139 V |
| Input frequency | 50/60 Hz |
| Output operation voltage (min) | 120 V |
| Output operation voltage (max) | 120 V |
| Output frequency regulation | 50 - 60 Hz |
| Maximum current | 5 A |
| Surge energy rating | 490 J |
| Hold time (min) | 6 ms |
| Hold time (max) | 10 ms |
| EMI/RFI noise filtering | Yes |
| Noise level | 35 dB |
| Surge protection | Yes |
| Audible alarm(s) | Yes |
| Audible alarm modes | Alarm when on battery, Low battery alarm, Overload alarm |
| AC outlet types | NEMA 5–15R |
| Power plug | NEMA 5-15P |
| AC outlets quantity | 7 AC outlet(s) |
| Number of type F outputs | 0 |
| USB port | Yes |
| USB 2.0 ports quantity | 1 |
| Battery capacity | 66 VAh |
| Number of batteries supported | 1 |
| Battery life (max) | 5 year(s) |
| Battery recharge time | 10 h |
| Cold start | Yes |
| Form factor | Compact |
| Product colour | Black |
| Cable length | 1.52 m |
| LED indicators | Yes |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage temperature (T-T) | -15 - 45 °C |
| Operating relative humidity (H-H) | 0 - 90% |
| Storage relative humidity (H-H) | 0 - 95% |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 15000 m |
| Compliance certificates | RoHS |
| Certification | REACH, CEC, cTUVus, FCC Part 15 Class B, NOM, UL 1778 |
| Manual | Yes |
Product Information
| Brand | APC |
| Type | Specialty Batteries |
Description
APC Back-UPS BE600M1, 600VA, 120V,1 USB charging port Battery Backup & Surge Protector for Electronics and Computers Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Building Wiring Fault Indicator This LED informs users of potentially dangerous wiring problems in the wall circuit. Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery notification Warns when a battery is not available to provide backup power. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Simple battery replacement Increases UPS availability by allowing quick, easy battery replacement. Transformer Block Spacing Connect bulky transformer block plugs without covering up other outlets. USB connectivity Provides management of the UPS via a USB port (not available on all models).
